International Cruiser 250 Antifouling (Ireland Only)
5035686031883Regular price €133.95
Please note: Delivery of International paint products within Ireland only. If a colour is out of stock, contact us directly and we can try and get it for you in the shortest delays.
International Micron 350 Antifouling (Ireland Only)
5035686029545Regular price €164.95
Please note: Delivery of International paint products within Ireland only. If a colour is out of stock, contact us directly and we can try and get it for you ASAP.
Seajet 033 Shogun Self Polishing Antifoul (Ireland Only)
Regular price €99.95
Seajet 033 Shogun is premium self polishing antifouling which is highly effective against slime and weed. Suitable for high fouling areas.
Seajet 033 Shogun is a premium self-polishing antifouling. The paint is highly effective in preventing slime and weed from attaching to vessels. The antifouling is suitable for high fouling areas and has a high coverage rate. The colours available are grey, mid blue, dark blue, red and black and are used for the vessel’s surface beneath the water. Keep in mind that the colours may change slightly, due to friction of the water.
The Seajet 033 Shogun antifouling is the best option to prevent marine growth from attaching to yachts or motorboats. The special made paint is free of tin and is self-polishing. It can be used for vessels, which will not be travelling faster than 40 knots.
There are a few steps to take for a proper application of the paint to the surface. Firstly, if there is another layer of antifouling on the surface, you have to remove it. Removing antifouling has to be done by wet sanding, or by a chemical removal. Never use a burner to remove the antifouling.
If the previous antifouling is in bad shape, you will have to remove it entirely. If the existing paint is in good condition, use our Seajet antifouling tolerance table to make sure your antifouling is properly attached. Clean the antifouling with a high-pressure water spray with approximately 200 bar. It will help to remove the marine growth and salt crystals.
Before the application, make sure the surface is dry, clean and free of oil. Then, apply two layers of Seajet 033 Shogun. Make sure to add more layers of coating to sharp and hard to reach spots, such as the rudder and the waterline.
To apply the Seajet 033 Shogun antifouling to wood, you first have to use the Seajet 015 Underwater primer. For steel or polyester, either use Seajet 015 or 117 beforehand. Never apply Seajet 033 Shogun to aluminum.
|Type of product||Antifouling|
|Area of use||
|Recommended coats per season||2|
|Maximum speed||40 knots|
|Coverage rate||9.98 m² p/liter|
|Pack size||750ml / 2.5lt|
International Thinners No. 1 (Ireland Only)
12515Regular price €13.95
International VC Offshore Hard Antifouling (Ireland Only)
5035686097896Regular price €186.95
Thinner No. 3 (Ireland Only)
Regular price €21.50