230mm Sail Numbers & Letters
Regular price €2.50
230mm Sail Numbers and Letters in Black, Blue and Red
Suitable for Optimist, Topper, Laser 4.7, RS Feva and many other boats.
Other letters not listed are also available please call 01 280 6654 or email Sales@vikingmarine.ie
*Please note both Number 1 and Letter I are the same as are 6 and 9.
Set Of Pennant Holders/Toggles for Optimist
EX1338Regular price €9.95
Optiparts top pins, which do not cut the lines, as supplied with racing masts. (pack of 2)
Optimist Vectran Sail Ties
EX1336Regular price €11.50
Optimist sail ties for mast and boom, all in VECTRAN. Five 2.2mm tack lines and Fourteen 1.2 mm lacings. All lacing lines are now double length.
Optimist Buoyancy Bag Iod’95 48 L, With Tube - various colours
EX1219Regular price €39.95
These buoyancy bags from Optiparts are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon. Some Optimist buoyancy bags are available with a twist lock tube valve. This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48 liter buoyancy bags are slightly heavier than 43 liter buoyancy bags but after a capsize there is a lot less water in the boat.
Twist lock tube valve. Color red, size inflated 29 cm x 92 cm, content: 48 liter. Size deflated 44 cm x 98 cm, radius 5 cm.
Please note, not to over inflate the Optimist buoyancy bags. When bags are properly filled, they will be soft to the touch. Over inflated buoyancy bags may burst when heated up by the sun or rising temperatures. Make sure there are no sharp points in your boat that would snag or puncture the buoyancy bags.
Optiparts Universal Joint with Rope Core
EX652950Regular price €11.50
This releasable rubber joint / swivel for tiller extionsions is mounted with an aluminium pin only. The pin is kept in place by a piece of heat shrinkable tubing. To remove a joint : simply cut off the tubing and push the pin out.
The joint incorporates a fibre core molded up in the centre. The fibre core will avoid complete failure should the rubber tear which allows you to finish the race.
The distance between the mounting hole centers is 32 mm.
Optimist Wind Indicator PRO (podium edition)
EX1243Regular price €16.95
This windindicator from Windesign Sailing has a stronger vane-arm which is accurately balanced and performs amazing sensitive. The vane arm of both low friction indicators are now attached to the needle with a new positive locking system which prevents loosing the vane arm.
Wind Indicator Standard for Optimist EX1240
EX1240Regular price €13.95
Standard burgee, with a red PVC flag on a wire frame, which is currently used on many optimists and other dinghies. It has a 5 mm shaft, which fits all common top pins (pennant holders/Toggles)
Windesign Deluxe Aluminium Tiller Extensions
EX1140Regular price €36.95
Our most popular tiller extension. This versatile and strong tiller extension is perfect for a wide range of boats including the entire Topper Range, Optimists, Feva, Lasers and many more.
Made of black anodized 16 mm aluminium tube.
The aluminium tiller extensions are fitted with a releasable rubber joint / swivel and an eva foam grip. The releasable rubber joint / swivel has a rope core and is mounted with an aluminium pin only.
The pin is kept in place by a piece of heat-shrinkable tubing for easy replacement.
Size – Partnumber
60cm – EX652306 or EX1140 for Optimist
70cm – 652307 - Optimist Long Version
80cm – 652308
90cm – EX652309
100cm –EX652310 - Topaz, Topper , Feva
110cm – EX652311
120cm – EX652312 for Laser
Optimist Hand Bailer Large 3.5L
EX1442RRegular price €11.50
The traditional blow molded Optimist hand bailer for your dinghy. Contents: 3.5 liter. Fits perfectly to the corners of the IOD’95 Optimist hull. Red and green version available for port and starboard.
EX1203Regular price €32.95
Stainless steel lock to secure your mast from coming out of its step when the boat is capsized. This mast clamp has a rubber insert and should be clamped around the mast just under the deck. We suggest you use the collar in addition to the rope locking system to create double security. The lock will be provided with a line to attach it to the maststep
EX1203 Mast Clamp