Little Hawk Laser/Topper MK2 Podium Edition
H014F00Regular price €22.95
Use: Dinghy’s up to 8m.
Vane Arm Length: 15cm
Overall Height: 10cm
Overall Weight: 25gms
Bearing: Aluminium Pin
UV Protected: Yes
Balanced Arm: By design.
Digital 8 Sail Number - 230mm & 300mm
D8SN-1Regular price €3.00
230mm digital 8 sail numbers available in White or Black - Suitable for post 2006 Topper sails.
300mm Digital 8 sail number can be cut to shape for use as any number.
The 230mm White Digital 8 used as the championship number for Topper racing events.
Ronstan Bung - For Topper & Topaz
RF30285Regular price €5.50
Optiparts Universal Joint with Rope Core
EX652950Regular price €11.50
This releasable rubber joint / swivel for tiller extionsions is mounted with an aluminium pin only. The pin is kept in place by a piece of heat shrinkable tubing. To remove a joint : simply cut off the tubing and push the pin out.
The joint incorporates a fibre core molded up in the centre. The fibre core will avoid complete failure should the rubber tear which allows you to finish the race.
The distance between the mounting hole centers is 32 mm.
Topper Self Bailer Super Shute 60 C18
IB-S600Regular price €74.95
Super Shute 60 self-bailer with
stainless steel fixing nuts, bolts, packing washers, hole template and comprehensive fitting instructions.
Flange plate size: 112x65mm
Hole size: 92x46mm
RWO Omniflex Tiller Joint R0840
R0840Regular price €8.95
This tiller extension joint is suitable for extensions with an internal tube diameter of 13mm, hole centers 32mm.
Used frequently for tiller extensions in Laser, Topper (including Topaz), Optimist and more.
Spare Pneumatic Trolley Wheel Large 4.80/4.00-8
160100Regular price €34.95
Spare large pneumatic wheel for dinghy launching trolleys. 200 Kg Load.
25.4mm Shaft x 75mm (3") wide
30mm Shaft x 75mm (3") wide (20mm bore with inserts)
4.80/4.00-8 Tyre (4 ply)
EX1079 or 121700 or 160100
PSP Tell Tales
PS-1920Regular price €19.95
Simple but essential for perfect upwind sailing. Each pack includes: 16 self adhesive discs, 8 red woollen threads and 8 green woollen threads.
EX1430Regular price €9.95
16 Telltales (8 red and 8 green) in resealable display packing with instruction manual. With adhesive discs to fix the telltales to the sail.
Ronstan Bung with Socket for Topper & RS Boats
RF294Regular price €7.50
Topper bung and screw socket for the transom (rear) of the sailboat.
This allows water to be released from the hull.
Also used on RS Boats such as Feva
Official Topper Mainsail 5.3mt and 4.2mt (folded)
Regular price €489.95 Sale price €450.00
Topper Race Mainsails
What size Topper Mainsail?
Age 10-16 will usually use the Topper Race Mainsail 5.3m² Sail
Weight Guideline: 47 – 63kg, but there are many sailors either side of this guideline enjoying sailing their Topper and competing at a high standard.
The smaller 4.2m sail is suitable for younger and lighter sailors from 35kg.
The Topper 4.2 Sail has a sleeve which covers the top portion of the mast. This means that there is no need to change mast or other fittings if you want to change between a full sail (5.3m) and a 4.2m Sail
Harken 29mm Carbo T2 Soft Attach Block 2146
2146Regular price €35.95
The high-strength composite T2™ is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for. The T2 can be tied, spliced, or lashed to almost anything. A length of Spectra® line is included.
Spectra® is a registered trademark of Honeywell International, Inc.
Harken 57mm Carbo Ratchet Block with Swivel 2135
2135Regular price €99.95
Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
On/off switch operates from both sides.
Standard grip: medium/light air; 10:1 holding power
Topper Spars, Upper & Lower Mast & Boom
D1/3Regular price €345.95
Topper Lower Mast D1/3 (new in 2014)
Topper Upper Mast E14 – complete with plugs and Mast Head fitting.
Topper Boom G1/3
Official Topper® Boom with new gooseneck fitting. is complete with gooseneck, kicker strop, outhaul, (with camcleat), end clew and clew hook fittings.
Contact us for "dressed" Boom Assembly Race rigged G1/3/REGATTA:
G1/3/Regatta - Regatta Boom Assembly Fully Race Rigged – complete with 4:1 harken racing outhaul, blocks for mainsheet system (attached by a shackle at the clew end of the boom and the strop by 4mm Dyneema cord) 5mm shock cord is attached to the clew strop hook (for efficiency) and the Mylar sleeve for the centre mainsheet system (Please call for pricing)
Windesign Racing Tiller Extensions - 20mm X-Gripped
EX1145Regular price €40.50
Made of black anodised 20 mm aluminium tube.
The aluminium tiller extensions are fitted with a releasable rubber joint/swivel and X foam grip.
The releasable rubber joint/swivel has a rope core and is mounted with an aluminium pin only.
The pin is kept in place by a piece of heat-shrinkable tubing for easy replacement.
Size – Partnumber
60cm – EX652006 see EX1145 for oppys
70cm – EX652007
80cm – EX652008
90cm – EX652009
100cm – EX652010
110cm – EX652011
120cm – EX652012